Fire acts very much like a living organism. It basically devours everything in front of it if it is not stopped. Perhaps you have seen or read about major forest fires that have destroyed hundreds and possibly of thousands of acres. Then you understand the concept that a fire is a monster that devours everything in its path unless it is contained. C02 extinguishers are a common way to kill a fire.

When a fire is allowed to burn freely, such as a house fire, it does so in a very out of control manner. In order to kill the hungry beast before it destroys your home and possibly harms your family or pets you need a way to smother them. The way a fire grows is it lives on fuel and oxygen, much like other living things.

Cutting off the oxygen of a fire requires a method of suffocating it, much like you might smother someone with a blanket. C02 extinguishers cut the oxygen out of the air and so they are effective for killing some classes of fires.

Fire falls into several classifications. These classifications are all grouped by letters. Class A fires are those that are made from standard combustible products such as paper or wood. Class B fires are the result of bringing flammable liquids such as gasoline. Class C fires are electrical fires. These are most often caused by faulty wiring that causes a spark. C02 extinguishers are used for class B and Class C fires.

Class A fires such as paper and wood can be put out by being smothered by water. Water will not suffocate Class B and Class C fires. In fact it will do just the opposite. It will fuel the fire. As the saying goes water and gasoline don’t mix and you should never put water on a gasoline fire. Many fires that burn in a home are Class B and Class C fires. For this reason it is important to always have a c02 extinguisher in your home.

The c02 inside of the extinguisher is liquid but when it is dispensed it mixes with the air and creates foam. This foam looks like snow and is a form of dry ice. You have probably seen foam used to put out a fire, this foam was most likely c02.

To operate a cO2 extinguisher you will need to aim the extinguisher toward the fire then pull the plug in the handle. This plug is a safety device so the extinguisher will not go inadvertently. Once the pin has been pulled you need to squeeze the trigger (lever) to release the gas. You should point the extinguisher toward the bottom of the fire, and then spray in a side to side motion. As you put out the fire aim the extinguisher at the far edges of the fire and spray until the fire is completely put out.

Since a c02 extinguisher contains a form of dry ice it serves as a great way to chill a case of warm beer. You can place the beer in a cooler and point the extinguisher toward the beer and spray it with c02. Before drinking from the beer bottles be sure to wipe off the beer

Jason Williams is an expert in home alarms. If you would like more information about CO2 extinguishers or are searching for a trusted security company please visit http://www.adt.co.uk

Related posts:

1. Select The Correct Fire Extinguishers To Save Your Home You will find several kinds of fire extinguishers on the...
2. Benefits And Disadvantage Of C02 Extinguishers Non combustible materials are used in dry chemical fire extinguishers...
3. Tips On Buying The Right Fire Extinguishers At some point, all people have been exposed to different...
4. The Assurance Of Having Fire Extinguishers In Your House Getting out of a jam when there is a fire...
5. Prevent Fires By Using A C02 Extinguisher C02 extinguishers are filled with carbon dioxide. They are made...

Related posts brought to you by Yet Another Related Posts Plugin.